Press the Audio icon to access “in.stream 2” player controls. If you are using a device with Bluetooth technology, it must be connected for functions to work. Use code 5555 to pair.
Speaker settings: Move the sliders to adjust the Balance, Fader, and Subwoofer settings. The Fader and Subwoofer sliders will only appear in the Speakers menu if the corresponding speakers are available.
Source menu: To change the audio source, simply tap on the “Audio Settings” menu and select the desired audio source or device.
Connect Bluetooth: The first time you use your Bluetooth device with an Audio system, you must first “pair” or connect your device to the spa audio system according to the standard functionality of your specific device.
*Each device must be connected separately. Use code 5555 to pair. (The connection code for Passion Spas is 2288.)
Disconnect Bluetooth: If a device with Bluetooth technology is connected to the Audio system, you can disconnect it by pressing the Disconnect button at the bottom of the screen. Doing so will also prevent the audio system from automatically reconnecting to this specific device until it has been reconnected using the device itself. For proper function, place your Bluetooth device within 20 feet (6 meters) of your spa. The device should have a “line of sight” to the spa control panel/equipment door area.
NOTE: Certain house construction materials and other obstructions can impair Bluetooth connectivity. You may need to experiment with where to place your device for best results.
