Technical Support

First, determine if your spa has an air bleeder screw or not. To determine if your spa has an air...

A Series R Series

As you use your spa, soap and detergent residues from your skin and bathing suits, along with other substances from...

Most hot tubs and swim spas come featured with a water feature. The valve that turns the water on or off...

Spa Ownership Has Never Been So Easy Step 1: Simply drop one pod directly in your spa every 7 days for...

Away In Away mode the spa temperature set point will be reduced by 20°F. Spa will remain in Economy mode...

Because Bullfrog Spas are built with the patented JetPak Therapy System™, they utilize about 90% less plumbing than conventional hot...

How Do I Maintain My Spa in the Winter? Bullfrog Spas are made in Utah, for the Utah climate. You...

This article covers the steps for installing the cloud control module offered on Bullfrog Spas manufactured between 2013 and 2018....

How to Avoid Broken Clips If your spa is located in a high-wind area, the clips may not be sufficient...

Before you pour new concrete, you have the option to run conduit up through the concrete so the wire for...

How to clean the filters in your Bullfrog Spas S150 or S200 swim spa. Why are one of the swim...

How To Remove a M-Series JetPak How To Remove a R/A-Series JetPak (2022 and older)

(ML Panels: ML550 Thru ML900) Your spa is set to normally allow you to raise the Set Temperature only to...

A Series Standard Regular JetPak A Series Standard Neck JetPak A Series Plus/Select Regular JetPak A Series Plus/Select Neck JetPak

Spas with three pumps offer a luxurious experience, providing a range of massage options and power levels for ultimate relaxation....