Removing The M Series Cabinet Door
CLICK HERE for how to remove/reinstall an X/R/A Series Equipment Door
Step 1: Remove trim strips. Remove trim strips from the trim channels by pulling carefully and firmly, working from the bottom of the trim strip to the top. (Sometimes a screwdriver is needed to help pry the trim strip out of the channel.)
Step 2: Remove door – Carefully pull bottom of door out toward you. Carefully grab the bottom corner of the door and pull it out enough that you can slip your other hand in behind the side of the door about 4-5 inches (10-13 cm) up from the bottom. From there you will pull the door firmly away from the spa until the snap on the door pulls out of the snap feature in the rib. Continue to pull the door away until the second snap on the other side pulls out. The door can then be dropped out of the groove on top and removed from the spa.
Do not to leave the removed panel door sitting in the sun or it might warp
Step 3: Unplug the lights to the Bullfrog Spas logo on the cabinet.
Reinstalling The M Series Cabinet Door
Step 1: Reconnect the the lights to the Bullfrog Spas logo on the cabinet.
Step 2: Reinstall Door – Slip the upper lip of the door into the top behind the lip of the spa. Lower the door while gently pushing on it until you feel the snaps line up with the snap features in the ribs. Starting from one side, force the first snap into place and then force the other side until the door is secured.
Step 3: Replace trim strips by snapping each carefully into the trim channel. (A rubber mallet may be helpful if the channel is too tight.)